Nema 34 (86mm) motor stepper linier hibrid
>> Pedaran pondok
| Tipe Motor | Stepper bipolar |
| Lengkah Sudut | 1,8° |
| Tegangan (V) | 3 / 4.8 |
| Ayeuna (A) | 6 |
| Résistansi (Ohm) | 0,5 / 0,8 |
| Induktansi (mH) | 4 / 8.5 |
| Kawat kalungguhan | 4 |
| Panjang Motor (mm) | 76 / 114 |
| Suhu Ambient | -20 ℃ ~ + 50 ℃ |
| Naékna Suhu | 80K Max. |
| Kakuatan diéléktrik | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Résistansi insulasi | 100MΩ Min.@500Vdc |
ACME kalungguhan screw motor stepper ngarobah gerak Rotary kana gerakan linier, kalawan ngagunakeun screw kalungguhan;screw kalungguhan boga rupa kombinasi diaméterna jeung kalungguhan, pikeun nyugemakeun sarat aplikasi béda.
Timah screw stepper motor ilaharna dipaké dina aplikasi anu merlukeun precision gerakan linier, noise low, ongkos éféktif tinggi, kayaning alat médis, alat telekomunikasi, jsb
ThinkerMotion nawarkeun rentang pinuh ku kalungguhan screw motor stepper (NEMA 8, NEMA11, NEMA14, NEMA17, NEMA23, NEMA24, NEMA34) kalawan rentang beban tina 30N mun 2400N, jeung 3 jenis sadia (éksternal, captive, non-captive).Customizations bisa diolah per pamundut, kayaning panjangna screw & screw tungtung, marake magnét, encoder, nut anti backlash, jsb .;jeung screw kalungguhan ogé bisa Teflon coated kana pamundut.
>> Parameter listrik
| Ukuran Motor | Voltaseu / Fase (V) | ayeuna / Fase (A) | Résistansi / Fase (Ω) | Induktansi / Fase (mH) | Jumlah Kawat kalungguhan | Inersia rotor (g.cm2) | Beurat Motor (g) | Panjang Motor L (mm) |
| 86 | 3 | 6 | 0.5 | 4 | 4 | 1300 | 2400 | 76 |
| 86 | 4.8 | 6 | 0.8 | 8.5 | 4 | 2500 | 5000 | 114 |
>> Spésifikasi lead screw jeung parameter kinerja
| Diameter (mm) | Timbel (mm) | Lengkah (mm) | Pareuman kakuatan ngonci diri (N) |
| 15.875 | 2.54 | 0,0127 | 2000 |
| 15.875 | 3.175 | 0,015875 | 1500 |
| 15.875 | 6.35 | 0,03175 | 200 |
| 15.875 | 12.7 | 0,0635 | 50 |
| 15.875 | 25.4 | 0.127 | 20 |
Catetan: mangga ngahubungan kami pikeun leuwih spésifikasi screw kalungguhan.
>> 86E2XX-XXX-6-4-150 baku gambar outline motor éksternal
Notes:
Panjang screw kalungguhan bisa ngaropéa
Machining ngaropéa téh giat dina tungtung screw kalungguhan
>> 86NC2XX-XXX-6-4-S standar captive motor outline gambar
Notes:
Machining ngaropéa téh giat dina tungtung screw kalungguhan
| Stroke S (mm) | Ukuran A (mm) | Ukuran B (mm) | |
| L = 76 | L = 114 | ||
| 12.7 | 29.7 | 0 | 0 |
| 19.1 | 36.1 | 2.1 | 0 |
| 25.4 | 42.4 | 8.4 | 0 |
| 31.8 | 48.8 | 14.8 | 0 |
| 38.1 | 55.1 | 21.1 | 0 |
| 50.8 | 67.8 | 33.8 | 0 |
| 63.5 | 80.5 | 46.5 | 8.5 |
>> 86N2XX-XXX-6-4-150 baku non-captive gambar outline motor
Notes:
Panjang screw kalungguhan bisa ngaropéa
Machining ngaropéa téh giat dina tungtung screw kalungguhan
>> Speed jeung dorong kurva
86 runtuyan 76mm motor panjang bipolar Chopper drive
100% frékuénsi pulsa ayeuna sareng kurva dorong (Φ15.88mm lead screw)
86 runtuyan 114mm panjang motor bipolar Chopper drive
100% frékuénsi pulsa ayeuna sareng kurva dorong (Φ15.88mm lead screw)
| Timah (mm) | Laju liniér (mm/s) | |||||||||
| 2.54 | 1.27 | 2.54 | 3.81 | 5.08 | 6.35 | 7.62 | 8.89 | 10.16 | 11.43 | 12.7 |
| 3.175 | 1.5875 | 3.175 | 4.7625 | 6.35 | 7.9375 | 9.525 | 11.1125 | 12.7 | 14.2875 | 15.875 |
| 6.35 | 3.175 | 6.35 | 9.525 | 12.7 | 15.875 | 19.05 | 22.225 | 25.4 | 28.575 | 31.75 |
| 12.7 | 6.35 | 12.7 | 19.05 | 25.4 | 31.75 | 38.1 | 44.45 | 50.8 | 57.15 | 63.5 |
| 25.4 | 12.7 | 25.4 | 38.1 | 50.8 | 63.5 | 76.2 | 88.9 | 101.6 | 114.3 | 127 |
Kaayaan tés:
Chopper drive, euweuh ramping, satengah mikro-stepping, tegangan drive 40V
